Split Co-rotating Twin-screw Extruder Used for Thermosetting Plastic Extrusion

Product Description

Split Twin Screw Extruder:It is more convenient to clean barrel and screw；It can more easy to see the mixing and plasticizing state of materials in the screw, and can arrange the screw combination more rationally；More convenient to eliminate screw overload；It is more convenient to check the wear of screw elements and barrel. 

In the past, the barrel of the twin-screw extruder is integral and cannot be opened. The split type twin-screw extruder is a split type, which is composed of two halves of the barrel, the lower half of the barrel is fixed on the frame, the upper half of the barrel is connected to the lower half of the barrel by worm gear reducer. Usually, the upper half of the barrel and the lower half of the barrel is bolted by two rows of bolts. When it is necessary to open the barrel, only loosen the bolts and turn the handle of the worm box to open the barrel.

The screw and barrel of Split twin screw extruder adopt advanced “building block” design, screw by various forms of suits on the core shaft screw block, barrel liner set depending on the screw block can be adjusted, thus according to technical requirements such as material variety and combined the ideal form of screw element structure, realize the material conveying, plasticizing, refinement, shear, exhaust, build pressure and extrusion process, so as to better solve the general difficult to balance the so-called screw the contradiction between generality and specificity. Another advantage of the “building block” design is that worn screw and barrel components can be partially replaced to avoid the entire screw and barrel greatly reducing maintenance costs.