Successful Delivery of CHT65D Twin Screw Extruder with Underwater Pelletizing Line

The underwater pelletizing line is generally composed of start-up valve, die head, pelletizer, water bypass system and pipe fittings, centrifugal dehydrator and control system.

Underwater pelletizing line is a kind of “Hot-face cutting”. When uniform high-temperature molten materials enter the die head flow channel from the end of the upstream equipment, the materials are cut into drops by the high-speed rotating cutter blade when they just leave the die hole and enter the processing water. Due to the physical characteristics of the maximum specific surface area of particles and the temperature difference between the molten drop polymer and the processing water, the drops solidify and form particles close to the sphere. This granulation method of “hot-face cutting before water-cooling” determines that it is well qualified for granulation of materials with poor melting strength, high viscosity and high heat sensitivity.

The customer’s material is SEBS. After the formula test specified by the customer, the customer fully affirmed the machine performance of Cowin Extrusion.

Successful Delivery of CHT65D Twin Screw Extruder with Underwater Pelletizing Line 1
Successful Delivery of CHT65D Twin Screw Extruder with Underwater Pelletizing Line 2
Successful Delivery of CHT65D Twin Screw Extruder with Underwater Pelletizing Line 3
Successful Delivery of CHT65D Twin Screw Extruder with Underwater Pelletizing Line 4

The finished particles were sent to the customer for testing, and the test results met the customer’s expectations. After being approved by the customer, the production task that took two and a half months ended completely. The whole production line was packaged and sent to Paraguay.

Successful Delivery of CHT65D Twin Screw Extruder with Underwater Pelletizing Line 7
Successful Delivery of CHT65D Twin Screw Extruder with Underwater Pelletizing Line 6

Share:

Facebook
Twitter
Pinterest
LinkedIn
On Key

Related Posts

Meet You at Iran Plast 2024

Meet You at Iran Plast 2024

Date: September 8-11, 2024 Place: Tehran International Exhibition Centre (Tehran, Iran) Company Name: NANJING COWIN EXTRUSION MACHINERY CO., LTD Exhibition Booth: Hall 38B, Stand A10 Exhibition

Read More »
Color Masterbatch Formulation

Color Masterbatch Formulation

The five principles of carrier selection in masterbatch formulations are compatibility, fluidity, processability, high viscosity, and applicability. In complex situations, not only the fluidity but also the pigment dispersity and mixed distributivity need to be considered. Only by unifying and balancing these complex properties can we arrive at the most suitable masterbatch formulation.

Read More »

Inquire Now

Contact Us Today For A Free Quote

Inquire Now

We welcome your cooperation and we will develop with you.